Polyether Urethane Methacrylates |
|
BOMAR™ Polyether Urethane Methacrylates are preferred in applications where adhesion, gloss and low skin sensitivity is required. They offer lower viscosities compared to their Polyester Urethane Methacrylate counterparts.
 |
Download*
BOMAR™ Oligomers Selector Guide (1.37 MB)
* Registration Required |
|
 |
Polyether Urethane Methacrylates
Click on the product number below for additional information. |
|
|
| Oligomer |
Applications |
Benefits |
Viscosity, cP |
Tg |
BR-116
Request a Sample
|
Steel-Bonding Coatings
Glass-Bonding Coatings
Soft Touch Coatings
Adhesion Promoter for Coatings |
Improves adhesion; enhances flexibility; low color; provides softness; gloss finish; exhibits hydrolytic stability; oil & chemical resistant; low shrinkage; |
80,000
at 25°C |
-18°C |
|
BR-146
Request a Sample
|
Coatings for Glass
Electronics |
Low color/non-yellowing; provides soft touch finish; improves adhesion, impact and abrasion resistance, and weatherability; enhances weatherability; gloss finish; exhibits hydrolytic stability |
43,000
at 25°C |
-28°C |
|
BR-202
Request a Sample
|
Primer Coatings
Interior Glass Coatings
Electronics |
High bond strength; high elongation; exhibits hydrolytic stability; low color; improves adhesion |
100,000
at 25°C |
32°C |
|
BR-204
Request a Sample
|
Primer Coatings
Coatings for Glass |
High bond strength; high elongation; exhibits hydrolytic stability; low color; low neat viscosity |
15,000
at
25°C |
-43°C |
|
BR-543M
Request a Sample
|
Optical Coatings on Glass
Adhesion Promoting Co-
Oligomers |
High tensile strength; excellent optical clarity; exhibits hydrolytic stability; provides impact, oil, and chemical resistance; improves adhesion; excellent weatherability |
30,000
at 50°C |
-62°C |
|
BR-571MB
Request a Sample
|
Scratch-Resistant Coatings
Hard Glossy Coatings |
Gloss finsh; low yellowing, enhances flexibility; improves adhesion; provides abrasion resistance; excellent weatherability |
100,000
at 50°C |
50°C |
|
XR-145S
Request a Sample
|
Coatings for Glass
Primer Coatings |
Low color/non-yellowing; enhances impact resistance;
low viscosity; low skin irritation |
67,000
at 25°C |
N/A |
|
|
|
Max says if you don't see an oligomer that suits your application, call Dymax Application Engineering for a recommendation. We specialize in custom oligomer design and development!
|
